Open Linux device according to a mighty ARM processor. Network multi-tool — built-in Wi-Fi 6E and Gigabit Ethernet. Expandable via M.2 modules: 5G cellular modem, SDR broadcast and more.

PRE-ORDER NOW

Follow advancement at the Developer Portal >>

OPEN LINUX PLATFORM

Flipper One runs on entirely open-source Linux firmware alongside a mainline kernel. This method supreme compatibility alongside bleeding-edge kernel versions, liberated from vendor-specific BSP restrictions and binary blobs. Our goal is to create a completely upstream-supported ARM device that never becomes outdated, and a well-documented phase giving the community maximum liberty to customize:

  • Full mainline Linux kernel support
  • No binary blobs
  • No vendor-locked BSP

We have partnered alongside the Collabora team, who are actively operating on bringing the RK3576 SoC into the mainline kernel, to create Flipper One completely upstream-supported and liberated from binary blobs. Read Collabora blog post

CO-PROCESSOR ARCHITECTURE

Two autonomous processors activity together in parallel, all controlling distinct sub-systems of Flipper One.
This architecture allows you to control the Linux sub-system immediately from the built-in LCD display, without losing admission to the equipment equal whenever the Linux kernel is not yet prepared or turned off.

Why 2 processors?

  • Low-power MCU (Raspberry Pi RP2350) — an energy-efficient microcontroller liable for center equipment control. It drives the LCD display, bodily buttons, and position LEDs. It manages the power sub-system and controls the Linux OS footwear parameters whenever the Linux sub-system is off. More concerning MCU Firmware >>
  • High-performance CPU (Rockchip RK3576) — a mighty 8-core ARM system-on-chip that runs the Linux functioning system. It executes person applications, controls all networking interfaces specified as Wi-Fi and Ethernet, and manages high-speed peripherals including USB3 and PCIe. It additionally integrates an NPU for AI acceleration and a GPU for graphics output via HDMI and DisplayPort. More concerning Linux sub-system >>

ONE CABLE FOR EVERYTHING

Get SSH admission and accusation the equipment via a sole USB cable! No additional adapters needed for Linux console admission or powering the equipment — Flipper One can simultaneously emulate a virtual network adapter, a serial adapter (COM port), and a mass-storage device.

No drivers required on macOS, Linux, Windows, iOS, or Android.

NETWORK SCANNER

Analyze wired and wireless IP networks. Flipper One helps you map network topology, detect energetic hosts, and scan for open ports and services. It can additionally act as a passive sensor to detect network attacks and study anomalies.

POWER METER

The power use meter plant akin a wattmeter, showing in genuine period how much power the complete scheme uses, including the CPU and peripherals. It helps you comprehend what is happening under the hood: whether the scheme is idle or actively working.

M.2 MODULES

The center idea of Flipper One is an expandable hardware platform. Create your own specialized tool alongside a high-speed M.2 enlargement component that installs inner the device, under the rear plate. It supports nearly any category of component — cellular or moon modems, SDR modules, AI accelerators, SSDs (NVMe or SATA), and Wi-Fi cards via adapters.

M.2 tech specs

  • M.2 type: Key-B
  • Supported sizes: 2230 (via extender), 2242, 3042, 3052
  • Supported thickness: up to D3 (double-sided modules)
  • Interfaces: PCIe 2.1 ×1 / USB 2.0 / USB 3.1 / SATA3 / SIM cardstock + eSIM
  • Extra interfaces: Serial Audio / UART / I²C

Open origin mounting system

All mechanical parts for component mounting are completely open source. You can scheme your own antennas, cooling system, and mounting solutions for additional accessories.

GPIO MODULES

DIY modules can be connected via the GPIO connector using norm 2.54 mm pin headers. To create the assembled equipment easier to transport around, the GPIO component is positioned alongside the equipment build and can be covered alongside a protective cover.

Check out GPIO specialized specification and examples of GPIO modules.

Desktop Mode

Connect Flipper One to an external display alongside a sole USB-C cable for a complete desktop experience. Support for DisplayPort Alt Mode allows one cable to provision power, transmit video, and nexus USB peripherals specified as a keyboard and mouse simultaneously.

Satellite NTN Modem

Satellite modem

NTN (Non-Terrestrial Networks) — is a moon communication technology, a low-speed association designed for IoT devices, standardized by 3GPP as part of the 5G and LTE specifications. It uses the norm cellular stack, including SIM/eSIM authentication, roaming, and regular IP traffic.

We desire to add NTN moon connectivity assistance to Flipper One to assistance popularize this innovation and provision engineers and enthusiasts a chance to activity alongside genuine moon infrastructure.
To create this happen, we're looking for a partner business akin Skylo that's prepared to activity alongside us to add assistance for their moon network to our eSIM component and assistance us choose a particular NTN M.2 module that we can officially support.
Read additional on the Modules → Satellite modem page.

Built-in Advanced Wi-Fi Chip

Built-in Wi-Fi Chip

We desire to build the most versatile unified Wi-Fi into Flipper One — it needs to assistance all the features required for Wi-Fi network analysis, including detect manner and packet injection. For now, we've settled on the famous Mediatek MT7921U chipset. It's contemporary enough, supports three frequence bands, and ticks fair concerning all box. We're actively evaluation this part correct now and we'd affection you to associate in.

Why MT7921AUN?

The identical chipset is used in the famous ALFA AWUS036AXML adapter, and there's a considerable community about the open-source MT7921U driver. The chief strengths of this chipset:

  • Modern Wi-Fi 6E: 802.11ax, 2x2 MIMO
  • Frequencies: 2.4 / 5 / 6 GHz bands
  • Open mainline Linux driver: mt7921u
  • Monitor manner support
  • Integrated Bluetooth 5.2

BUILT-IN eSIM

Flipper One has a built-in eSIM part that comes pre‑provisioned alongside a Flipper SIM data plan.

To use the eSIM data plan, you need to instal a 5G modem in the M.2 slot. You can additionally toggle between the built-in eSIM and a bodily SIM card.

What is Flipper SIM?

We're operating on an experimental connectivity project for network geeks. Flipper SIM is a worldwide SIM cardstock for routers, phones, and IoT devices, alongside advanced features specified as always-on connectivity, outage-proof, traffic filtering, and network administration tools. We'll portion additional particulars soon!

Coming soon